IDEAL AP140 PRO User Manual

42
The indicators on the control panel do not
light up at all.
Is the air purier switched on?
Switchtheairpurieronbypressingthe
on/off button (A, page 32).
Has the Quiet function been activated?
 Disable the Quiet function by pressing
the Quiet button (D, page 34).
Automatic mode is not working properly. The air purier calibrates the air
quality sensor. This happens when you
rst switch it on and after disconnecting it
from the mains.
 Wait until the calibration process has been
completed (this may take a few minutes)
The air quality sensor is dirty.
 Clean the openings for the air quality
sensor L, dust sensor M (page 32), the air
intake ducts and the interior of the air
 purier(wheretheltercartridgeis
located) with a vacuum cleaner.
The air quality sensor is not detecting the
air quality reliably
 Calibrate the air quality sensor by briefly
disconnecting it from the mains again!
Troubleshooting

IDEAL AP140 PRO Specifications

General

Brand	IDEAL
Model	AP140 PRO
Category	Air Cleaner
Language	English