IDEAL Independent C24 Installation And Servicing

3Independent - Installation and Servicing
DOCUMENT AMENDMENTS
Relevant Installation changes implemented in this book from Mod Level ......A02 (June 10) to A03 (Nov 10)
Ideal Stelrad Group reserve the right to vary specication without notice
FOR ANY TECHNICAL QUERIES PLESE RING THE
IDEAL INSTALLER/TECHNICAL HELPLINE : 01482 498663
NOTE. BOILER RESET PROCEDURE -
To reset boiler, turn mode knob to reset position and immediately turn knob back to required setting.
The boiler will repeat the ignition sequence.
NOTES FOR THE INSTALLER
Page 4, Table 2

Page 8, Gas Supply

Page 8, Flue Installation

Page 12, Frame 4 Water Treatment

Page 14, Frame 6 Unpacking

Page 23, Frame 23 Connecting the Flue to the Boiler

Page 29, Frame 32 Wiring Diagram

Page 32, Frame 35 General Checks

Short List of Parts diagrams

Installer Notication Guidelines

Page 60 - 61 Commissioning Checklist

Boiler Guarantee

205367-3.indd 3 13/12/2010 16:20:45

IDEAL Independent C24 Specifications

General

Model	Independent C24
Category	Boiler
Type	Combi
Output	24 kW
Dimensions	700 x 395 x 278 mm
Mounting	Wall-mounted
ERP Rating	A
CH Output	24 kW
DHW Output	24 kW
Fuel	Natural Gas
Warranty	2 years