FAULT FINDING
FAULT FINDING FAULT FINDING FAULT FINDING FAULT FINDING FAULT FINDING
Independent - Installation and Servicing
80
ALTERNATING ‘F’ AND ‘2’ - FLAME LOSS
* Note: due to the wave form of the rectied voltage, the reading will vary depending on the type of meter used to measure the
value. In general terms a reading greater than 150V indicates that the correct voltage is supplied to the gas valve.
81
ALTERNATING ‘F’ AND ‘3’ - FAN FAULT
79
ALTERNATING ‘F’ AND ‘1’ - LOW WATER PRESSURE
205367-3.indd 53 13/12/2010 16:21:43
To Next Page
Loading...
