IDEAL LOGIC Combi ES24 - User Manual

When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.
LOGIC COMBI ES
ES24 ES30 ES35
USER GUIDE
For Installation Guide see reverse of book

IDEAL LOGIC Combi ES24 Specifications

General

Type	Combi Boiler
Output Rating	24 kW
Fuel Type	Natural Gas
Efficiency	94%
Dimensions (H x W x D)	700 x 395 x 278 mm
Mounting	Wall-mounted
ERP Rating	A
CH Output	24 kW
DHW Output	24 kW
Heating Flow Temperature Range	30 - 80 °C
Hot Water Flow Rate at 35°C Rise	9.8 l/min
Warranty	2 years

Summary

Safety Information and Regulations

Gas Safety and Installation Requirements

Details legal requirements for installation by qualified Gas Safe Registered Engineers.

Electricity Supply Specifications

Specifies the required electrical supply (230V ~ 50Hz) and fusing (3A) for the appliance.

Important User Safety Notes

Crucial precautions for safe operation, including casing integrity, compartment use, and user capabilities.

Boiler Operation Procedures

How to Light the Boiler

Step-by-step guide on initiating the boiler's ignition sequence and operation.

Boiler Reset Procedure

System Pressure and Condensate Management

Loss of System Water Pressure

Condensate Drain System Issues

Safety Warnings and Maintenance

Escape of Gas Procedure

Immediate actions to take if a gas leak is suspected, including emergency contact.

Troubleshooting Common Issues

Troubleshooting: No Hot Water

Troubleshooting: No Central Heating

Troubleshooting: No Hot Water or Central Heating

Fault Codes and Actions

Fault Code Interpretation and Resolution

Detailed guide to understanding fault codes and the steps to take for each.