15
5
CHANGE SETTINGS
Efciency Level
To view the efciency level of the boiler press ENTER and the
following screen will be displayed.
Press “-“ until the following screen is displayed.
Service Mode Maximum Rate
Press ENTER and a screen similar to following will be displayed.
Press EXIT twice to return to normal operation.
System Frost Protection
This feature can only be accessed if an outside sensor has
been connected. The pump will run continuously if the outside
temperature is less than 5ºC.
Press “-” until the following screen is displayed.
Press ENTER and a screen similar to the following will be
displayed.
Pump may run during night
Press “+” to activate or “-“ to de-activate.
Press EXIT twice to return to normal operation.