IDEAL Viceroy GT Series

Viceroy G.T.
Installation, Assembly and Servicing
Oil or Dual Gas Fired Boilers
CAUTION.
To avoid the possibility of injury during the installation, servicing or cleaning of this
appliance care should be taken when handling edges of sheet steel components.
Assembly and Installation Instructions for Ideal Viceroy Oil, Gas or Dual Fired heating boilers should be read in
conjunction with the general technical data tables enclosed and any other technical publication supplied with the
burner.
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - info@mytub.co.uk

IDEAL Viceroy GT Series Specifications

General

Brand	IDEAL
Model	Viceroy GT Series
Category	Boiler
Language	English

Summary

INTRODUCTION

DUTY

Describes boiler suitability for different systems.

FOUNDATION

Requirements for the boiler's base.

GAS SAFETY REGULATIONS

Legal requirements for gas appliance installation.

BOILER MODELS

Viceroy GT Boiler Model Descriptions

Describes DELUXE, STANDARD, and standard models.

INSTALLATION OF THE BOILER

Required Clearances and Access

Details minimum dimensions for access and ventilation.

Ventilation General

Recommendations for air supply and risks of corrosion.

ASSEMBLY

Boiler Assembly Steps

General instructions for boiler assembly.

HYDRAULIC CONNECTION

Hydraulic Connection Details

Dimensional information and recommendations for hydraulic connections.

FILLING THE INSTALLATION

Filling Procedure

Steps and recommendations for filling the boiler with water.

CHIMNEY CONNECTION

Chimney Flue Gas Temperature

Precautions for high-performance boiler flue gas temperatures.

TERMINATING THE FLUE

Flue Sizing and Measurement

Guidance on chimney height, cross-section, and measurement points.

Flue Connection Design

Details on material, design, and minimal load loss for flue connections.

OIL OR GAS CONNECTION

Gas Supply Specifications

Sizing and compliance for gas supply.

Oil Supply and Storage

Compliance for oil storage, supply pipe, and connections.

ELECTRICAL CONNECTIONS TO THE CONTROL PANEL

Deluxe Control Panel Wiring

Wiring details for the DELUXE control panel.

Wiring Duct Routing

Guidelines for routing sensor and power cables.

SETTING THE SVR OPTION

SVR Option Box Installation

Steps to fit the SVR option box into the control panel.

SVR Limit Thermostat Fitting

Instructions for fitting the limit thermostat for the SVR option.

SETTING AN SV-MATIC WEATHER COMPENSATOR

SV-matic Compensator Installation

Steps to fit the SV-matic weather compensator into the control panel.

BURNER CONNECTION

Standard Control Panel Connections

Connection details for the standard control panel.

START UP

Deluxe Control Panel Overview

Overview of the DELUXE control panel features.

Boiler and DHW Thermostat Adjustment

Guidance on setting boiler and DHW thermostats.

Control Panel Switch Operations

Instructions for setting switches on the control panel.

MAINTENANCE

Flue Gas Circuit Cleaning

Steps for cleaning the flue gas circuit.

Baffle Part Identification

Table listing baffle part numbers for different boiler sizes.

COMBUSTION CHAMBER MAINTENANCE

Combustion Chamber Cleaning

Procedure for cleaning the combustion chamber.

Smoke Box Cleaning

Steps for cleaning the smoke box.

Long Stop Boiler Safety

Advice for boilers stopped for extended periods.

GENERAL DATA

Boiler Technical Specifications

Table of technical data for various boiler sizes.

MAIN DIMENSIONS

Boiler Main Dimensions

Diagrams and table showing boiler dimensions.

ASSEMBLY VICEROY GT

Boiler Assembly Tools

List of required tools for assembling the boiler.

Boiler Section Assembly

Step-by-step guide to fitting boiler sections.

STANDARD CONTROL PANEL WIRING

Standard Panel Wiring Layout

Visual representation of the standard control panel connections.

Standard Panel Component Key

Legend for identifying components and wire colours.

DELUXE PANEL BURNER CONNECTION GUIDE

Deluxe Panel Burner Circuit

Instructions for connecting the burner circuit to the deluxe panel.

Deluxe Panel Terminal Connections

Detailed guide for specific terminal connections (T1, T2, S3, etc.).