INSTALLATION
2.26 DISPLAY FUNCTIONS IN NORMAL OPERATION
OUTSIDE SENSOR NOT CONNECTED
Boiler Switched Off: (On/Off Switch is Off)
MENU
OFF
No Demand: Timer Off or Room Stat &
Cylinder Stat Off
MENU
READY
TIMER OFF OR ROOM THERMOSTAT
AND CYLINDER THERMOSTAT OFF
Demand On
MENU
60
O
C
ON
Boiler Frost Protection: occurs if Flow
Temperature less than 5°C
MENU
BOILER FROST
PROTECTION ACTIVE
SWITCH OFF TEMPERATURE 19
O
C
Service Due: shown after 12 months
operation, see page 39 to reset.
MENU
60
O
C
ON
SERVICE DUE Ideal Boilers 01482 498660
OUTSIDE SENSOR CONNECTED
Boiler Switched Off: On/Off Switch is Off
MENU
OFF
No Demand: (Timer Off or Room Stat &
Cylinder Stat Off)
MENU
READYREADY
TIMER OR ROOM
THERMOSTAT OFF
TIMER OR CYLINDER
THERMOSTAT OFF
15°C
Cylinder Demand On, CH Demand Off
Cylinder Demand On, CH Demand On
MENU
60
O
C TO CYLINDER
ON
60°C
ON
60°C
15°C
Cylinder Demand Off, CH Demand On
MENU
ON
60°C
15°C
READY
TIMER OR CYLINDER
THERMOSTAT OFF
Boiler Frost Protection: occurs if Flow
Temperature less than 5°C
MENU
BOILER FROST
PROTECTION ACTIVE
SWITCH OFF TEMPERATURE 19
O
C
Service Due: shown after 12 months
operation, see page 39 to reset.
MENU
READY
TIMER OR ROOM
THERMOSTAT OFF
SERVICE DUE Ideal Boilers 01482 498660
ON
60°C
2.27 CHANGING SETTINGS
To switch Cylinder & CH Off:
move the On/Off switch into
the Off position, the screen
below will be shown (note: Frost
protection still active)
OFF
EXIT
To switch Cylinder & CH On:
move the On/Off switch into the
On position, the screen below
will be shown
ON
EXIT
To change the Boiler
Temperature Set Point:
rotate the Boiler Temperature
Control Knob, the screen below
will be shown
EXIT
60
O
C
80
O
C
30
O
C
SELECT MAXIMUM BOILER TEMPERATURE
To change the Room
Temperature Set Point (only
if Outside Sensor connected):
rotate the Boiler Temperature
Knob, the screen below will be
shown
EXIT
22
O
C
30
O
C
10
O
C
SELECT ROOM TEMPERATURE
To Next Page
Loading...
