IDEAL Vogue System Gen 2 S15 - Page 42

42
Installation and Servicing
SECTION 2 - INSTALLATION
42
INSTALLATION
MENU OPERATION - CONT’D
SERVICE MODE MINIMUM RATE
This feature will run the burner at
minimum rate. Note that a CH demand
has to already be present for this feature
to be active. To activate the feature press
MENU and the following screen will be
displayed.
EXITSELECT
MENU
SERVICE COMPANY NAME
SERVICE COMPANY PHONE NUMBER
SHOW EFFICIENCY LEVEL
Press
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
until the following screen is
displayed.
EXITSELECT
MENU
PUMP MODULATION
PLOT GRAPHS
SERVICE MODE
MAXIMUM FLOW TEMPERATURE
Press SELECT and the following screen
will be displayed.
EXITSELECT
SERVICE MODE
MAXIMUM CH RATE
MINIMUM CH RATE
Press SELECT and the following screen
will be displayed.
EXIT
SERVICE MODE
MINIMUM CH RATE
FAN TARGET
FAN ACTUAL
TIME LEFT
18%
18%
15 min
Operation will end automatically after 10
mins or press EXIT to end manually.
SERVICE MODE MAXIMUM RATE
This feature will run the burner at
maximum rate. Note that a heat demand
has to already be present for this feature
to be active. Gas rate will reduce as
ow temperature approaches 80ºC. To
activate the feature, press MENU and the
following screen will be displayed.
EXITSELECT
MENU
SERVICE COMPANY NAME
SERVICE COMPANY PHONE NUMBER
SHOW EFFICIENCY LEVEL
Press
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
until the following screen is
displayed.
EXITSELECT
MENU
PUMP MODULATION
PLOT GRAPHS
SERVICE MODE
MAXIMUM FLOW TEMPERATURE
Press SELECT and the following screen
will be displayed.
EXITSELECT
SERVICE MODE
MAXIMUM CH RATE
MINIMUM CH RATE
Press
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
and the following screen will be
displayed.
SERVICE MODE
MAXIMUM CH RATE
MINIMUM CH RATE
EXITSELECT
Press SELECT and the following screen
will be displayed.
EXIT
SERVICE MODE
MAXIMUM CH RATE
FAN TARGET
FAN ACTUAL
TIME LEFT
73%
73%
15 min
Operation will end automatically after 10
mins or press EXIT to end manually.
PUMP MODULATION
The boiler is factory set for pump
modulation to occur. If you wish to
disable modulaton, press MENU and the
following screen be displayed.
EXITSELECT
MENU
SERVICE COMPANY NAME
SERVICE COMPANY PHONE NUMBER
SHOW EFFICIENCY LEVEL
Press
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
until the following screen is
displayed.
EXITSELECT
MENU
PLOT GRAPHS
3 WAY VALVE MIDPOSITION
SERVICE MODE
PUMP MODULATION
Press SELECT and the following screen
will be displayed.
PUMP MODULATION
EXITSET
70% is equivalent to 6m head of pressure
100% is equivalent to 7m head of pressure
Press
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
or
MENU
SHOW EFFICIENCY LEVEL
HOT WATER PREHEAT ON / OFF
SERVICE COMPANY PHONE NUMBER
SERVICE COMPANY NAME
MAXOFF
MAXOFF
SELECT EXIT
to change the setting and
press SET to enable.