5: SPECIAL FUNCTIONS
« FC4A MICROSMART USER’S MANUAL » 5-37
Displaying and Changing Data Register Values
This section describes the procedure for displaying and changing the data register value.
Example: Change data register D180 value to 1300
1. Select the Data Register menu.
2. Select the operand number.
3. The data of the selected data register number is displayed.
4. Change the data to 1300 as described below.
5. The changed data is displayed without flashing. Save the changes.
screen.
digit.
Select digit.
the value.
selection.
digit.
Select digit.
selection.
digits.
Select digit.
the value.
selection.
digit.
Select digit.
the value.
data change.
Write the new data to the CPU RAM.
Return to the Data Register menu.
To Next Page
Loading...
Need help?
General
