HR9Z-B2192 8/2020 13
In addition, terms used in the present document may tangentially be used as they are derived from
other standards such as:
Finally, the term
zone of operation
may be used in conjunction with the description of specific
hazards, and is defined as it is for a
hazard zone
or
danger zone
in the
Machinery Directive
(
2006/42/EC
) and
ISO 12100:2010
.
Standard Description
IEC 60034 series Rotating electrical machines
IEC 61800 series Adjustable speed electrical power drive systems
IEC 61158 series Digital data communications for measurement and control – Fieldbus for use in
industrial control systems
To Next Page
Loading...