IDEC MICROSmart FC6A-C24R1CE Ladder Programming Manual

FC6A S ERIES MICROS MART L ADDER P ROGRAMMING M ANUAL FC9Y-B1726 26-31
26: S CRIPT
Example 7.10 Tan g en t
Script
Operation Description
Calculates the tangent of the radian value of D0020 and stores the result in D0010.
Only the data type F (float) can be used.
Example 7.11 Arcsine
Script
Operation Description
Calculates the arcsine of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.12 Arccosine
Script
Operation Description
Calculates the arccosine of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.13 Arctangent
Script
Operation Description
Calculates the arctangent of the value of D0020 and stores the result as radians in D0010.
Only the data type F (float) can be used.
Example 7.14 Convert angle to radians
Script
Operation Description
Converts the value of D0020 from degrees (°) to radians and stores the result in D0010.
Only the data type F (float) can be used.
Example 7.15 Convert radians to angle
Script
Operation Description
Converts the value of D0020 from radians to degrees (°) and stores the result in D0010.
Only the data type F (float) can be used.
[D0010] = TAN([D0020]);
[D0010] = ASIN([D0020]);
[D0010] = ACOS([D0020]);
[D0010] = ATAN([D0020]);
[D0010] = RAD([D0020]);
[D0010] = DEG([D0020]);

IDEC MICROSmart FC6A-C24R1CE Specifications

General

Brand	IDEC
Model	MICROSmart FC6A-C24R1CE
Category	Computer Hardware
Language	English