7
Icon Description
Battery at 25% power
Battery critically low
Battery empty
Battery charging
Software upgrade is available (SmartService* Solutions customers only)
Warning notification (gray icon indicates the warning has been viewed and is
unresolved)
Error notification (gray icon indicates the error has been viewed and is unresolved)
Lost communication with IDEXX VetLab Station
Lost Wi-fi communication
Lost Ethernet connection
Powering the Analyzer On/Off
To Power the Analyzer On
Hold the power button until you hear a beep.
To Power the Analyzer Off
Hold the power button for 3 seconds and release when you hear a beep.
Charging the Analyzer
The analyzer will charge automatically when it is plugged into a power source. You can charge the
analyzer while it is powered on or off, but it will charge faster when the analyzer is powered off. It will
take approximately 8 hours to charge a completely expired battery when the analyzer is powered off
during the charging process.
To Charge the Analyzer
1. Plug the USB mini B end of the power cord into the power port on the back of the analyzer.
2. Plug the AC end of the power cord into an appropriate electrical outlet.
Getting Started
To Next Page
Loading...
Need help?
General
