April 2020
7
Operation with the IDS NXT cockpit: IDS NXT
Fig. 1: Firewall settings
After launching, you will be in the “Device overview”. IDS NXT cockpit scans the network for IDS NXT
cameras and lists them in this overview. A log-on to IDS NXT cameras is possible by direct entry of an IP
address.
Automatic finding of IDS NXT cameras only works if the following parameters are possible in
the network:
·
UDP broadcasts via port 5055 ("Finder” queries from IDS NXT cockpit)
·
TCP response from devices via port 5055
·
UDP broadcasts via port 3956 (GVCP - GigE Vision Control Protocol)
More detailed information on the devices found can be displayed by clicking on them.