8A3xxxx 144BGA EVK User Manual
© 2019 Integrated Device Technology, Inc.
Description
The 8Axxxx 144BGA EVK is designed to help customers evaluate
IDT ClockMatrix devices. This document discusses the following
about the EVK:
• Introduces the board and its power supply and jumper settings
• Describes the input and output connectors for normal
operation
• Explains how to bring up the board using the Timing
Commander software GUI
• Discusses how to configure and program the board to
generate standard-compliant frequencies
Kit Contents
• 8A34xxx 144BGA Evaluation Board
• USB Type A cable
Requirements
• IDT Timing Commander Software Installed (available at
www.idt.com/timingcommander)
• ClockMatrix GUI (available at www.idt.com/clockmatrix)
• USB 2.0 or USB 3.0 interface
• Windows XP SP3 or later
• Processor: Minimum 1GHz
• Memory: Minimum 512MB; recommended 1GB
• Available disk space: Minimum 600MB (1.5GB 64-bit);
recommended 1GB (2GB 64-bit)
• Network access during installation if the .NET framework is not
currently installed on the system
8A3xxxx 144BGA EVK Board
To Next Page
Need help?
General
