22
4.2 Standard CMOS Setup
The Standard CMOS Setup is used for basic hardware system configuration. Main
function is to modify Date/Time settings and Floppy/Hard Disk Drive settings.
Please refer the following screen for this setup.
For IDE hard disk drive setup, please check the following possible setup
procedure:
1. Use Auto setting for detection during bootup.
2. Use IDE HDD AUTO DETECTION in the main menu to automatically enter
drive specifications.
3. Manually enter the specifications by yourself from the “User” option.
Halt On (All Errors) : You could choose All Errors, No Errors All, but
Keyboard , All, but Diskette, and All, but Disk/Key Some embedded
systems don’t need keyboard and monitor in application, in this case, you
could select No Errors.
To Next Page
Loading...
Need help?
General
