23
4.3 BIOS Features Setup
BIOS Features Setup is designed for customer’s to tune ROCKY-538TXV board to
its best performance possible. As for normal operations, customers don’t have to
change any default setting as the default setting is pre-set for most reliable
operation.
BootUp Sequence:
Allow users to set the sequence of A:,C:,and CDROM.
Video BIOS Shadow C000,32K:
Enable - Will increase the video speed.
Shadow C8000-CFFFF,D0000-D7FFF,& D8000-DFFFF :
When the installed add-on card’s ROM address is as above address, you
could enable shadow for higher operation performance. When you enable
shadow function, it will also reduce the memory available by between 640KB
and 1024KB.
To Next Page
Loading...
Need help?
General
