EasyManuals Logo

IEI Technology ROCKY-538TXV User Manual

IEI Technology ROCKY-538TXV
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Chapter 1. Introduction
Thank you for choosing ROCKY-538TXV Pentium® with VGA Single Board
Computer. The ROCKY-538TXV board is an ISA/PCI form factor board, which
comes equipped with high performance Pentium® CPU and advanced high
performance multi-mode I/O, designed for the system manufacturers, integrators,
or VARs that want to provide all the performance, reliability, and quality at a
reasonable price.
This board has a built-in DiskOnChip™(DOC) Flash Disk suitable for embedded
applications. The DOC Flash Disk is 100% compatible to hard disk, which allows
users to use DOS command without having to install any extra software utility.
DOC currently is available from 2MB to 72MB. An alternative solution namely,
PROMDISK-Chip™, can be used in the same DOC socket.
An advanced high performance super AT I/O chip – Winbond W83977TF is used in
the ROCKY-538TXV board. Both on-chip UARTs are compatible with the
NS16C550. The parallel port and IDE interface are compatible with IBM PC/AT
and XT architectures.
In addition, the ROCKY-538TXV Ver. 6.x provides two 168-pin DIMM sockets for
on-board DRAM. The RAM module accepts 8, 16, 32,64 or 128MB memory. Total
on-board memory can be configured from 16MB to 256MB.
ROCKY-538TXV uses the advanced INTEL Chipset, 430TX which is 100% ISA/PCI
compatible chipset with PCI 2.1 standard.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IEI Technology ROCKY-538TXV and is the answer not in the manual?

IEI Technology ROCKY-538TXV Specifications

General IconGeneral
BrandIEI Technology
ModelROCKY-538TXV
CategoryMotherboard
LanguageEnglish

Related product manuals