18
4
HANDLING AND INSTALLATION 1
26200300.fm
POSITIONING THE EQUIPMENT
The manufacturer shall not be held liable for any malfunctioning resulting
from failure to observe the following installation instructions.
The installation area must be in proper environmental conditions:
- Dry and not dusty.
- Properly ventilated but not subject to hot and cold air currents.
- Protected against exposure to sunlight.
- The floor must be stable and level to ensure that the equipment is correctly
placed.
- Comply with the installation distances reported in chapter "Perimeter Areas",
page13.
- Comply with the relative Moisture and room temperature conditions reported in
chapter "Technical data", pag.12.
To Next Page
Loading...