ifi JOLLY Series - Set Point Adjustment; Manual Defrosting Cycle

24
5
USE AND OPERATION 1
26200300.fm
SET POINT
- Press key to display the Set Point. Wait for 5 seconds or press key
again to display the temperature.
- Press key and hold it for 3 seconds to change the Set Point. LED
starts flashing.
- Press keys to change the value.
- To save the value, press button or wait 15 seconds to exit programming.
STARTING A MANUAL DEFROSTING CYCLE
- Press key and hold it for 3 seconds to activate the defrosting cycle.