20
4
HANDLING AND INSTALLATION 1
26200300.fm
MOVING THE DISPLAY CABINET
- If connected to the electric-
ity supply, turn the display
cabinet off and disconnect
from the electricity mains.
- Screw the support feet (D)
positioned on the operator
side, to lift them from the
ground.
- Move the display cabinet on
its wheels, paying attention
not to take it to sloping
areas.
- Unscrew the feet (D) until
they are solidly on the
ground in order to avoid
unexpected movements of
the display cabinet;
The support feet (D)
extracted by a maxi-
mum of 20 mm.
- Fit the glass frame following the procedures described in the booklet “Installation
Manual” here attached.
- Reconnect the display cabinet to the electricity supply.
Avoid applying stress-
es to the glass struc-
tures when
manoeuvring the dis-
play cabinet.
To Next Page
Loading...