SmartController CR2530
12
6 Set-up
6.1 Programming
The user can easily create the application software by means of the IEC 61131-3
compliant programming system CoDeSys 2�3�
6.2 Required documentation
In addition to the CoDeSys programming system, the following documents are
required for programming and set-up of the device:
● Programming manual CoDeSys V2�3
(alternatively as online help)
● SmartController system manual
(alternatively as online help)
The manuals can be downloaded from the internet:
www.ifm.com → Data sheet search → CR2530 → More information
CoDeSys and SmartController online help:
www.ifm.com → Service → Download → Systems for mobile machines*
*) Download area with registration
To Next Page
Loading...
