Seite
15
A wide area around the place of maintenance has to be cordoned off, if necessary.
The required maintenance, inspection and repair services have to be performed within
the period stipulated.
The operating personnel has to be informed before beginning the above mentioned
services.
At all services of maintenance, inspection and repair even outside the
filter engine the system has to be switched to the voltage free mode.
Do put up a sign forbidding the premature switching on!
Should the services be performed above body height the intended steps
and ladders or hydraulic ramps have to be used. Do not use parts of the
engine as steps! If the maintenance services have to be performed in big
heights, make use of safeguards!
All of the grips, steps, railings, banisters, pedestals, landings and ladders
have to be kept free from soling as well as from snow and ice!
At the beginning of the maintenance/repair service the filter engine and especially
connections, plugs and screws have to be cleaned from oil and emulsion remains! Do not
use aggressive cleansing agents! Do not use cleansing cloths made of fibrous tissue!
Cover all openings through which no cleansing agent must enter the filter engine for security
or operating reasons before the cleaning of the filter engine. Do not use water or steam
sprayers when cleaning the engine. Especially endangered are the electric motor, the switch
box and the locking switch.
After the cleaning all cover have to be removed without residue!
Check all loosened screw for proper fit!
Check all safety features for proper function after the cleaning service.
To Next Page
Loading...