1 – 4
ᵏ
SAFETY
WATCH FOR UNDERGROUND UTILTIES.
Mark the location of underground utilities
such as gas lines, sewers, and power lines
before any digging operations. If necessary,
the utilities should be temporarily
discontinued.
CHECK THE JOB SITE.
ALWAYS check the job site for grade and
stability of the ground, ventilation, depth of
water and ambient obstructions. Avoid
operating your equipment too close to an
overhang.
Since this machine is not provided with anti-
explosion design, NEVER use it inside a
tunnel or in explosive environment to avoid
hazard caused by an explosion.
CLEAR ALL PERSONNEL FROM THE
MACHINE AND AREA.
Be sure to barricade the job site to prevent
entry of the unauthorized. Confirm that there
is no one around the machine before starting
the engine or operating the machine.
To Next Page
Loading...
