8
P8
OR
Setting and Using Alarms
1
Press and hold the Alarm 1 Button
until
current alarm time
flashes on the
display and a beep sounds.
This unit has two independent alarms, Alarm 1 and Alarm 2. Each is set and operates in the same
way. Instructions below show Alarm 1. Follow the same method to set Alarm 2.
2
Press and release the – or + Set Button to adjust the clock to the desired alarm time (press and
hold for rapid adjustment). NOTE: Make sure to set the correct AM or PM time. AM/PM
indicators appear just below the time display.
Press and release the Alarm 1 Button to complete setting Alarm 1. 2 beeps confirm alarm is armed.
3
2 SECS
To Next Page
Loading...
