900861-00NC
37
IHP.us.com
REPLACEMENT PARTS
Continued
Item Description Part Number
1 36” Complete Stainless Steel Burner Pan Assembly F3458
1 48” Complete Stainless Steel Burner Pan Assembly F3459
1 60” Complete Stainless Steel Burner Pan Assembly F3460
1 72” Complete Stainless Steel Burner Pan Assembly F3461
2 Bottom Support Fin for 36” Model - 2 per unit (Figure 10, Page 13) F3462
2 Bottom Support Fin for 48” Model - 2 per unit (Figure 10, Page 13) F3463
2 Bottom Support Fin for 60” Model - 2 per unit (Figure 10, Page 13) F3464
2 Bottom Support Fin for 72” Model - 2 per unit (Figure 10, Page 13) F3465
3 LED Tray Assembly - Left 36” F3491
3 LED Tray Assembly - Left 48” F3492
3 LED Tray Assembly - Left 60” F3493
3 LED Tray Assembly - Left 72” F3494
4 LED Tray Assembly - Right 36” F3495
4 LED Tray Assembly - Right 48” F3496
4 LED Tray Assembly - Right 60” F3497
4 LED Tray Assembly - Right 72” F3498
5 1/2” Flex Gas Line (46-inch Length) F3466
6 Air Shutter Orifice NG (for 36” Natural Gas Models) F3467
6 Air Shutter Orifice NG (for 48” Natural Gas Models) F3468
6 Air Shutter Orifice NG (for 60” Natural Gas Models) F3469
6 Air Shutter Orifice NG (for 72” Natural Gas Models) F3470
7 EcoFlow Gas Valve with Step Motor with ECO-LSS-44 for 36” Model F3515
7 EcoFlow Gas Valve with Step Motor with ECO-LSS-34 for 48” Model F3516
7 EcoFlow Gas Valve with Step Motor with ECO-LSS-27 for 60” Model F3517
7 EcoFlow Gas Valve with Step Motor with ECO-LSS-44 for 72” Model F3471
8 Natural Gas Regulator, REG-C80K-NG (convertible to LP). See Page 33 F3510
9 Side Mount Pilot Assembly (complete assembly with TC), ECO-VK-Pilot J7935
10 Ignition Control Module ( includes 8-pin wire harness), ECO-VK-ECOMOD-WWH F2694
11 Tempered Glass Windshield for 36” model (1/4” x 8” x 35-1/2”) (Pkg of 2) F3474
11 Tempered Glass Windshield for 48” model (1/4” x 8” x 47-1/2”) (Pkg of 2) F3475
11 Tempered Glass Windshield for 60” model (1/4” x 8” x 59-1/2”) (Pkg of 2) F3476
11 Tempered Glass Windshield for 72” model (1/4” x 8” x 71-1/2”) (Pkg of 2) F3477
12 LED Glass Retainer Clip (2 used per fireplace side) (Pkg of 4) F3478
13 Windshield Clips (4 used per single-sided fireplace side) (Pkg of 8) F3479
14 5/8” Wire Grommet for LED Lighting (Pkg of 4) F3480
15 12-volt adaptor for LED Lighting (Has male & female terminals) F3481
16 7.5-volt adaptor for IPI Ecoflow Valve System (Has two female terminals) F3482
17 RGB Control Box/Lid Assembly (Fireplace switches and LED dimmer) F3483
18 Bottom End (Used to center burner pan into fireplace) F3484
19 Pilot Cover (Sits inside bottom end, item #18) F3518
20 Ignition Hood with Screen F3485
NOTE: All items are shipped as one replacement part unless noted in the description.
To Next Page
Loading...
