EasyManuals Logo

IK Multimedia iRig Stream MIC PRO User Manual

IK Multimedia iRig Stream MIC PRO
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
English
15
Specifications
Common
Interface type: 2 in/2 out or 4 in/2 out
Conversion: 24-bit A/D, 24-bit D/A
Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Power: USB bus powered. When connected to an external PSU (iRig PSU 3A, not included), iRig Stream Mic
Pro charges the connected iOS lightning device.
Device connection: mini-DIN
Dimensions: 55mm/2.16” x 136mm/5.35” x 38mm/1.5”
Weight: 430 g
Microphone
Microphone type: condenser, electret
Capsules: dual 0.55” gold-sputtered capsules
Polar patterns: cardioid, omni, figure-8, stereo
Frequency response: from 20 Hz to 20 kHz
Maximum sound pressure: 115 dB SPL
High-pass filter: selectable between OFF, 60, 100 and 200 Hz
Headphone Output
Connector: 1/8” (3.5mm) TRS jack
Frequency response: from 20 Hz to 20 kHz
Output level: 7 mW/channel (32 Ohm load)
Dynamic range: 87 dB(A)
Aux Input
Connector: 1/8” (3,5mm) TRS jack
Nominal input level: -10 dBV
Frequency response: from 10 Hz to 20 kHz

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IK Multimedia iRig Stream MIC PRO and is the answer not in the manual?

IK Multimedia iRig Stream MIC PRO Specifications

General IconGeneral
BrandIK Multimedia
ModeliRig Stream MIC PRO
CategoryMicrophone
LanguageEnglish

Related product manuals