English
7
3.2 Headphone volume control
When the headphone symbol is lit green, the knob will control the level of the headphone output and the LED
ring will show the peak level of the overall streamed signal.
When you move the knob to increase or decrease the headphone volume, the LED ring will temporarily show
you the current level. After 2 seconds the LED ring will return showing the peak level.
Headphones level can also be controlled with the host volume’s control.
Press the knob to get to the Streaming level control.
3.3 Streaming level control
When the streaming symbol is lit green, the knob will control the level of the overall streaming signal (capsules,
aux in and loopback) and the LED ring will show the peak level of the overall streamed signal.
When you move the knob to increase or decrease the streaming level, the LED ring will temporarily show you
the current level. After 2 seconds the LED ring will return showing the peak level.
For the best performance, set this level so that your peaks stay at the second half of the LED ring (around LED
nr. 7 or 9).
If a clip will occur the streaming symbol will light red for 2 seconds.
Usage Note: when the microphone operates in multichannel mode the LED ring will show the level of the
channels 1 and 2 only (Aux In and Loopback).
Press the knob to get to the Loopback control.
To Next Page
Loading...
Need help?
General
