en Utensils
16
Using detergents with a rinse
aid component
De t e r g e n t s wi t h a ri nse ai d component
The function of rinse-aid is limited in
combination products. You will
generally obtain better results by using
rinse-aid.
Switching off rinse aid refill
indicator
If the rinse aid refill indicator H
bothers you (e.g. if you are using a
combination detergent with a rinse aid
component), you can switch off the
rinse aid refill indicator.
Proceed as described under "Setting
rinse aid quantity" and set the level to
:¯¯. The rinse aid refill indicator H is
switched off.
- Utensils
Utensils
Not suitable
ʋ Cutlery and utensils made of wood.
ʋ Delicate decorative glasses, craft
and antique utensils. These decors
are not dishwasher-proof.
ʋ Plastic parts not resistant to heat.
ʋ Copper and tin utensils.
ʋ Utensils which are soiled with ash,
wax, lubricating grease or ink.
ʋ Aluminium parts in conjunction with
highly caustic alkaline or highly
acidic cleaning agents, in particular
commercial or industrial cleaning
agents.
Aluminium and silver parts have
a tendency to discolour and fade during
the wash cycle. Even some types of
glass (e.g. crystal glass objects) may
turn cloudy after many wash cycles.
Glass and utensil damage
Causes:
ʋ Glass type and glass production
process.
ʋ Chemical composition of the
detergent.
ʋ Water temperature of the wash
programme.
Recommendation:
ʋ Use only glasses and porcelain
which the manufacturer designates
as dishwasher-proof.
ʋ Use a detergent which protects
utensils.
ʋ Take glass and cutlery out of
the dishwasher as soon as possible
after the programme ends.
To Next Page
Loading...
Need help?
General
