en Cleaning and maintenance
34
Special salt and rinse aid
Top up the salt and/or rinse aid as soon
as either of the refill indicators on the
control panel @ or H lights up.
Always top up the special salt
immediately before switching on the
dishwasher. This ensures that overrun
special salt solution is immediately
rinsed out and that corrosion in the
washing tank cannot occur.
Filters
The filters 1j keep large foreign
objects in the rinsing water away from
the pump. hese foreign objects may
occasionally block the filters.
The filter system consists of
ʋ a coarse filter
ʋ a flat fine filter
ʋ a microfilter
1. After each washing cycle check
the filters for residue.
2. Unscrew filter cylinder as illustrated
and take out filter system.
3. Remove the micro filter (1).
Press together the locking catches
(2) and remove the coarse filter (3).
4. Remove any residue and clean
filters under running water.
5. Re-install filter system in reverse
sequence and ensure that the arrow
marks are opposite each other after
closing the filter system.
To Next Page
Loading...
Need help?
General
