Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
Troubleshooting
Warning! Refer to Safety
chapters.
What to do if...
In any cases not included in this table please contact with an Authorised Service Centre.
The appliance does not turn on or does not heat up
Problem Check if...
The appliance does not heat up. The automatic switch-o is deactivated.
The appliance does not heat up. The appliance door is closed.
The appliance does not heat up. The fuse is not blown.
The appliance does not heat up. The Lock is o.
Components
Problem Check if...
The lamp is turned o. Moist Fan Baking - is turned on.
The lamp does not work. The lamp is burnt out.
The Food sensor does not operate. The plug of the Food sensor is fully inserted
into the socket.
Error codes
The display shows... Check if...
Err C2 You removed the Food sensor plug from the
socket.
Err C3 The appliance door is closed or the door lock
is not broken.
Err F102 The appliance door is closed.
Err F102 The door lock is not broken.
00:00 There was a power cut. Set the time of day.
ENGLISH 33