ENGLISH 21
• Do not let any objects fall onto the plate.
Even small objects (e.g. salt shaker) may
damage the burner/ plate.
• DANGER: Do not use glass ceramic
plates with cracks. Water may enter into
the cracks and cause a short circuit.
• DANGER: If the surface is damaged in
any way (e. g. visible cracks), switch off the
device immediately to reduce the risk of
an electric shock. If cooktop should break,
cleaning solutions and spillovers may
penetrate the broken cook-top and create
a risk of electric shock. Contact a qualified
technician immediately.
• WARNING: The glass ceramic
burner/plate is equipped with an
operating lamp and a residual heat
indicator. The residual heat indicator
indicates the position of the switched on
plate and remains illuminated after
switching off. (When the temperature of
the plate falls below touchable
temperature the indicator light will go off).
• IMPORTANT: Quick heating glass-
ceramic plates emit a bright light when
they are switched on. Do not stare to
bright light.
Switching the plate on
The burner/plate control knobs are used for
operating the plates. To obtain the desired
cooking power, turn the burner/ plate control
knobs to the corresponding level.
level
simmering
roasting
Switching the plate off
Turn plate control knob to OFF position (top).
expose you to chemicals
including Nickel (Metallic) which
is known to the State of
California to cause cancer. For
more information go to
www.P65Warnings.ca.gov
Note: Nickel is a component in all
stainless steel and some other
metal components.