IKEA ORMINGE - Troubleshooting

ENGLISH 29
Troubleshooting
Consult the Authorised Service Agent or technician with license or the dealer where you have
purchased the product if you cannot remedy the trouble although you have implemented the
instructions in this section. Never attempt to repair a defective product yourself.
Problem
Possible Cause
Solution
Oven emits steam
when it is in
use.
It is normal that steam
escapes during operation.
This is not a fault.
Product emits metal noises
while heating and cooling.
When the metal parts are
heated, they may expand and
cause noise.
This is not a fault.
Oven light does not work.
Oven lamp is defective.
Replace oven lamp.
Power is cut.
Check if there is power. Check the
fuses in the fuse box. If necessary,
replace or reset the fuses.
Product does not operate
The mains fuse is defective or
has tripped
Check fuses in the
fuse box. If
necessary, replace or reset them.
Product is not plugged into
the (grounded) socket
Check the plug connection.
Oven does not heat
Function and/or Temperature
are not set
Set the function and the
temperature with the Function
and/or Temperature knob/key.
In models equipped with a
timer, the timer is not
adjusted
Adjust the time.
Power is cut
Check if there is power. Check the
fuses in the fuse box. If necessary,
replace or reset the fuses.
Clock display is blinking or
clock symbol is on
A previous power outage has
occurred.
Adjust the time / Switch of the
product and switch it on again.