GB | Operating Instruction
Translation of the original Operating Instructions
GB-1
Petrol brush cutter IBF 43
CONTENTS
Page
PICTURES 1 - 3
1. INTENDED USE GB-1
2. IDENTIFICATION OF MAIN COMPONENTS GB-2
3. SYMBOLS GB-3
4. SAFETY REQUIREMENTS GB-4
5. MACHINE ASSEMBLY GB-6
6. PREPARING TO WORK GB-7
7. HOW TO START - USE - STOP THE ENGINE GB-7
8. USING THE MACHINE GB-8
9. MAINTENANCE AND STORAGE GB-10
10. TROUBLESHOOTING GB-11
11. DISPOSAL AND ENVIRONMENTAL PROTECTION GB-12
12. SPARE PARTS GB-12
13. RATINGS GB-13
EC DECLARATION OF CONFORMITY
WARRANTY / SERVICE
1. INTENDED USE
The device is intended for cutting lawns and grass areas. The observance of the manufacturer‘s operating instructions
included is a prerequisite for the proper use of the device. Any other use that is not expressly permitted in these instruc-
tions can lead to the device being damaged and a serious risk for the operator. Observe the restrictions in the safety
instructions. Please note that our device has not been designed with the intention of it being used for commercial, trade
or industrial applications. We accept no liability if the device is used in commercial, trade or industrial operations or
corresponding activities.
Attention! Due to bodily endangerment of the operator the following work must not be undertaken with the motor scy-
the: Clearing pathways and as a chipper for shredding tree and hedge cuttings. Furthermore, the motor scythe must not
be used for levelling bumps in the ground such as mole hills for example. For safety reasons the motor scythe must not
be used as a drive unit for other tools or tool sets of any type. The machine must only be used for its intended purpose.
Any other use shall be considered improper use. The user/operator, and not the manufacturer, is responsible for any
damage or injuries arising from this.
To Next Page
Loading...
