Ikra IBKH 52 - End of Operation; Maintenance and Storage

• Cutting round trees
Walk round the tree from left to right, approaching the
trunks slowly so as not to strike the tree with the line and
keeping the cutting line head tilted forward slightly.
Remember that the nylon line could lop or damage small
shrubs and that the impact of the nylon line against the
trunk of bushes or tr
• Adjusting line length when working
This machine is tted with a “Tap & Go” head.
To release more line, tap the cutting line head against
the round with the engine at top speed: the line will be
released automatically and the knife cut o󰀨 the excess
length.
End of Operation
When you have nished your work:
- Switch o󰀨 the engine as indicated above (Chap. 6).
- Wait for the cutting device to stop and t the blade
guard.
Maintenance and Storage
Correct maintenance is essential to maintain the original
e󰀩ciency and safety of the machine over time.
WARNING! During maintenance operations:
- Remove the spark plug cap.
- Wait until the engine is su󰀩ciently cold.
- Use protective gloves when handling the blades.
- Keep the blade protection device on, except when
intervening directly on the blade.
- Never dispose of oils, fuel or other polluting mate-
rials in unauthorised places.
ANGLE TRANSMISSION
GB-35