GB-42
Allow only persons who understand the manuals of the Engine and the Tools to operate your power tool.
To receive maximum performance and satisfaction from your power tool, it is important that you read and understand
the maintenance and safety precautions, before using your power tool.
Contact your dealer or the distributor for your area if you do not understand any of the instructions in the manual.
WARNING! The vibration value may vary according to the usage of the machine and its tted equipment, and be
higher than the one indicated. Safety measures must be established to protect the user and must be based on the load
estimate generated by the vibrations in real usage conditions. In this regard, all the operational cycle phases must be
taken into consideration, such as switching o or idle running.
Warning: Prolonged exposure to vibrations can cause injuries and neurovascular disorders (also called “Renaud’s
syndrome”or “white hand”), especially to people suering from circulation disorders. The symptoms can regard the
hands, wrists and ngers and are shown through loss of sensitivity, torpor, itching, pain and discolouring of or structural
changes to the skin. These eects can be worsened by low ambient temperatures and/or by gripping the handgrips ex-
cessively tightly. If the symptoms occur, the length of time the machine is used must be reduced and a doctor consulted.
When working with the device, a certain level of noise cannot be avoided. Noisy work should be scheduled for hours,
during which it is allowed by statute or other local regulations. Adhere to any applicable rest times and limit your work-
ing time to the necessary minimum time. For your personal protection and the protection of people nearby, suitable
hearing protection must be worn.
Warning! This machine generates an electromagnetic eld when operated. This eld can aect active or passive medi-
cal implants in certain circumstances. In order to reduce the risk of severe injury or death, we recommend that people
with medical implants consult their doctor or the manufacturer of the medical implant before operating the machine.
EC Declaration of Conformity
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster - Germany, declare under our sole responsibility that the
product Multi-function garden tool 5 in 1 IBKH 52, to which this declaration relates correspond to the relevant ba-
sic safety and health requirements of Directives 2006/42/EC (Machinery Directive), 2014/30/EU (EMC-Guideline),
2016/1628/EU as amended by 2017/656/EU (Emmission Directive) and 2000/14/EC+2005/88/EC (noise directive).
For the relevant implementation of the safety and health requirements mentioned in the Directives, the following
standards and/or technical specication(s) have been respected:
EN ISO 11680-1:2011; EN ISO 11806-1:2011; EK9-BE-56(V3):2013; EN ISO 10517:2009+A1:2013
EN ISO 14982:2009, EN ISO 15503:2009+A2:2015, PAK-Anforderung / PAH Requirement AfPS GS 2014:01 PAK
Type examination certicate No. : MDC 2162; SGS 0890
measured acoustic capacity level 110,6 dB (A)
guaranteed acoustic capacity level 117,0 dB (A)
Conformity assessment method to annex V / Directive 2000/14/EC and Directive 2005/88/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster 15.01.2019
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation: Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
To Next Page
Loading...
