38
GB
ENGLISH
TECHNICAL DATA
Cordless Chainsaw IPCS 5245
Engine / Cubic capacity 2-Takt-Motor / 51,7 cm
3
Engine output max. 1,8 kW / 2,4 PS
Engine speed max. (according to ISO 11681-1) 12500 min
-1
Chain speed (according to ISO 11681-1) 16,4 m/s
No-load speed 3000 ± 400 min
-1
Fuel tank capacity 500 ml
Chain and bar type
18-325-58x72 (HYBL)/
ZLB18-72-5810P (HYBL)
Oil tank volume 250 ml
Cutting length 45 cm/18“
Weight as per standard ISO 11681-1 (without fuel, cutting devices and harness) 5,4 kg
Vibration details
Vibration total values (triaxial vector sum) determined according to ISO 22867:2021,
Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
Front handle / Rear handle
6,01 / 6,18 m/s
2
Noise information
Measured according to
1)
ISO 22868:2021;
2)
2000/14/ EG+2005/88/EC
Sound pressure level L
pA
1)
Uncertainty K = 3 dB (A) 100 dB (A)
Measured sound power level L
WA
2)
Uncertainty K = 3 dB (A) 114 dB (A)
Technical changes reserved.
SPECIFIED CONDITIONS OF USE
The chain saw is only intended for use outdoors. This machine is intended for use by consumers, i.e. laypersons. It is
intended for „hobby use“.
For safety reasons, the chian saw must be adequately controlled by using two-handed operation at all times.
The chain saw is designed for cutting branches, trunks, logs, and beams of a diameter determined by the cutting length
of the guide bar. It is only designed to cut wood. It is only to be used by adults who have received adequate training on
the hazards and preventative measures/actions to be taken while using the chain saw.
Do not use the chain saw for any purpose not listed in the specied conditions of use. It is not to be used for
professional tree services. The chain saw is not to be used by children or by persons not wearing adequate personal
protective equipment and clothing.
WARNING
When using the chain saw, the safety rules must
be followed. For your own safety and that of
bystanders, you must read and fully understand
these instructions before operating the chain saw.
You should attend a professionally organized safety
course in the use, preventative actions, rst-aid,
and maintenance of chain saws. Please keep these
instructions safe for later use.
WARNING
Chain saws are potentially dangerous tools.
Accidents involving the use of chain saws often
result in loss of limbs or death. It is not just the
chain saw that is the hazard. Falling branches,
toppling trees, and rolling logs can all kill. Diseased
or rotting timber poses additional hazards. You
should assess your capability of completing the
task safely. If there is any doubt, leave it to a
professional tree surgeon.
Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for
damages.
PMAKS 20
To Next Page
Loading...
