Ikra IPCS 5245 - Maintenance

48
Wear protective gloves.
Wear safety cut through resistant shoes
with safety sole and steel toe.
oil the chain
6
Press primer 6 times
Warning against hot surfaces!
Danger of burns!
Warning about inammable substances
Primer
Choke
Risk of injury !
Warning! Do not put hands under the
cover of the machine when it is running
Caution! Rotating electrical too!
0 I
Engine stop switch positions
0 = stop/O
I = run/On
Chain brake closed
Chain brake open
Slow
Quickly
Switch the engine o and remove the so-
cket plug before any work on the engine.
European Conformity Mark
Do not expose tools to rain. Do not use
tools in damp or wet locations.
114
Sound power level
45 cm
Guide bar length
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres..
Always operate with both hands! One-
handed operation prohibited!
Kickback!
MAINTENANCE
WARNING
If the engine is tampered with
engine will invalidate the EU type approval
for this product will expire.
DANGER
Switch the engine o and remove the socket plug
before any work on the engine. Wait until all rotating
parts have stopped and the appliance has cooled
down.
Keep the blade protection device on, except when
intervening directly on the blade.
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body! Never
clean the machine and its components with solvents,
ammable or toxic liquids. Us only a damp cloth making.
Use only original accessories and original spare parts. Using
other spare parts can result in accidents/injuries of the user.
The manufacturer will not be liable for any such damage.
Please contact our service department if you need
accessories or spare parts.
Only a regularly maintained and treated appliance can
serve as a satisfactory aid. Insucient maintenance and
care can lead to unforeseen accidents and injuries.
Repairs and works specied in these Instructions may
only be performed by qualied authorised sta.
Keep your chain saw professionally maintained and safe
Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
GB
ENGLISH