45
Maintenance
Equipment care
HANDLING THE INSIDE OF THE EQUIPMENT IS FORBIDDEN
Do not dismantle or try to repair the equipment, its accessories or its compo-
nents. This will render the warranty null and void.
J
Do not use the power cable if it is damaged.
J
To disconnect the power cable, pull carefully on the plug and not the cable.
J
To clean the panel and equipment connections:
F
Unplug the equipment.
F
Clean with a slightly damp, soft cloth.
F
Allow to dry completely before use.
J
Do not spill liquid onto the equipment.
J
Keep ventilation slots free of dust and any foreign bodies.
Troubleshooting
The most frequent problems arising during equipment installation are indicated below. If
you encounter any other type of problem, please contact the equipment sales team.
Problem
Possible cause What to do
Forgotten unlock code. - Contact your point of sale.
Nothing displayed on
LCD screen.
The power cable is not con-
nected properly.
Check the power cable.
The channels do not
adjust to the programmed
output level.
Lack of signal or unsuitable
channel level.
Check that the channel
programmed in the highest
output channel has a signal and
appropriate level. This is used
as a reference for output level
adjustment.
The display shows that
there has been a short
circuit.
Bad connection in the UHF
input.
Check the input connection
cables. Unplug the network
connection cable and reconnect
it.
EN
To Next Page
Loading...
