8
Product Operating
4. Cleaning mode
1>. Auto cleaning
The robot will clean a room automatically and adjust its cleaning according to the situation.
Note:
Press button on robot or button on remote control to start auto cleaning.
2>. Spot cleaning
Put the robot near a dirty area and press SPOT on remote control to start spot cleaning.
Note:
Spot cleaning will automatically stop after the area is cleaned and then the robot will turn
to selected mode.
3>. Edge cleaning
Put the robot near the edge (wall) and press EDGE on remote to start edge cleaning.
Note:
Edge cleaning will automatically stop when robot could not detect any edges, or you could
manually press CLEAN to stop edge cleaning..
To Next Page
Loading...
