Remote control
5
Note:
1. Install two AAA type batteries into the remote.
2. Take out the batteries if the remote control is not used for long time.
Product Parts
1. “ ” Clean
Press this button to start cleaning in selected mode
Press this button to make the robot stop when it’s cleaning.
Press this button to exchange from sleeping mode to selected mode.
2. Directional Buttons
A. “ ” button:
Press this button to increase number in scheduling or clock mode;
Press this button to make robot move forward in selected mode or make robot stop
when robot is moving forward.
B. “ ” button:
Press this button to decrease number in scheduling or clock mode.
Press"MAX", the vacuum power will be the strongest.
C. “ ” button:
Press this button to exchange from minute to hour in scheduling or clock mode;
Press this button to make robot turn left.
D. “ ” button:
Press this button to exchange from hour to minute in scheduling or clock mode;
Press this button to make robot turn right.
3. Plan
Press this button to enter scheduling mode when in selected mode.
Press this button to confirm scheduling in scheduling mode.
4. Clock
Press this button to enter clock mode when in selected mode.
Press this button to confirm clock setting in clock mode.
5. “ ” Home
Press this button to return robot to charging home base.
6. “ ” Edge
Press this button to make robot clean along wall.
7. “ ” Spot
Press this button to make robot start spot cleaning.
8. Shows the scheduling time.
9. Shows the clock time.