• Set the robot’s ON/OFF switch to I
green. After 25 seconds of start-up, the start/pause button fades in and
out.
• Press the HOME button on the remote control to allow the robot to dock
itself and start automatic charging.
Manual Charging
• Connect the adapter’s plug to the robot’s power socket.
• Connect the adapter’s power plug to the power supply. The start/pause
• After 25 seconds of start-up, charging starts. The start/pause button
NOTICE - When charging in the manual mode, the robot cannot perform the
scheduled automatic cleaning. Charge the robot in the automatic
charging mode whenever possible.
EN
11
1
2
To Next Page
Loading...
