Before First Use
DANGER - Keep any packaging materials away from children – these materials
are a potential source of danger, e.g. suffocation.
• Check the robot and accessories for transport damages.
• Before connecting the robot to the power supply, check that the power
supply voltage and current rating corresponds with the power supply
details shown on the adapter’s rating label.
• Install the AAA batteries in the remote control.
• Install the AA batteries in the electrowall.
• Install the side brushes and the main brush.
NOTICE - Ensure to install the left and the right side brush onto their respective
pins (yellow - left, blue - right).
6
5
Choosing the Main Brush
The robot has two main brush types to choose from:
Rubber brush (pre-installed)
2 in 1 main brush
NOTICE - For brush replacement instructions, refer to the “Cleaning and
Maintenance” chapter.
EN
9
To Next Page
Loading...
