Ilife A9 - Troubleshooting

•
Cleaning the High Performance Filter
•
cover (Fig. 1).
•
•
1
1
2
2
•
compartment.
Troubleshooting
NOTICE -
Never hold the robot under running water.
Problems Solutions
The robot cannot operate normally.
The robot stopped cleaning
suddenly.
Make sure the main power switch is in
the ON position.
•
Make sure the battery is fully charged.
•
If the problem persist, turn off the power
switch and then turn it back on.
•
Check if the battery has enough
electricity.
•
Check if the robot is malfunctioning and
showing the red light.
•
If the problem persist, turn off the power
switch and then turn it back on.
EN
24