22
EN
RINSING OF INTERNAL CIRCUITS
After the first use, or if the coffee machine has not been used for a long time, rinse the internal circuits by applying the following procedure:
1 2 2 4
Make sure that there are no E.S.E.pods inside
the machine, and switch it ON using the main
switch.
Close the espresso cup holder and place a large
empty cup under the dispenser spout.
When buttons
and are illuminated
and unblinking, the machine is ready to be
used.
Press the
button; the machine will
dispense water; press the button again.
The rinsing operation is completed when at
least three cups of water have been delivered.
Using cups
1
Lower the support to prepare an espresso
coffee correctly, and to use espresso cups.
2
To use large cups, close the support and place
the cup directly on the drip tray.
To Next Page
Loading...
