illy ESE - Programming the Delivery Volume; Adjusting the Volume of an Espresso Coffee; Adjusting the Volume of a Long Espresso Coffee

25
EN
4 5
Coffee temperature set indicator:
Both and buttons
flash.
The set temperature corresponds to the factory temperature.
Only the
button flashes
slowly (0.5 secs).
The set temperature has been increased by 3°C compared to
the factory settings.
Only the
button flashes
quickly (0.2 secs).
The set temperature has been increased by 6°C compared to
the factory settings.
Only the
button flashes
slowly (0.5 secs).
The set temperature has been decreased by 3°C compared to
the factory settings.
Only the
button flashes
quickly (0.2 secs).
The set temperature has been decreased by 6°C compared to
the factory settings.
After 5 seconds without any other action being
carried out, both
and buttons will
flash for 2 seconds, after which the machine
will exit the temperature change function.
The new set temperature will then be stored for
subsequent dispensing.
PROGRAMMING THE DELIVERY VOLUME
Follow the instructions given in the "starting the appliance/heating" paragraph.
Adjusting the volume of an espresso coffee:
Press and hold the button. The machine will start delivering coffee. Once the desired quantity is reached, release the button. The machine
will then stop dispensing coffee and the amount will be stored for subsequent deliveries.
Adjusting the volume of a long espresso coffee:
Press and hold the button. The machine will start delivering coffee. Once the desired quantity is reached, release the button. The machine
will then stop dispensing coffee and the amount will be stored for subsequent deliveries.
The factory-set volumes and temperatures are optimised for the best extraction of illy espresso and illy long espresso coffee.