illy ESE - Page 28

28
EN
5 6
0,6 L
7 8
0,6 L
The button flashes. The machine begins
dispensing water in an alternating cycle. The
button flashes.
At the end of the descaling cycle, the button
is steady on while the button is
flashing.
Remove the container and empty it.
Remove the tank, rinse it and fill with fresh
water. Reinsert the tank with fresh water into
the machine.
Place a container of at least 0.6 lt under the
dispenser.
9 10
0,6 L
Press the button to start the rinse cycle.
The button is steady on while the
button flashes.
The machine automatically interrupts the
rinsing cycle. The
and buttons flash
simultaneously.
Remove the container and empty it.
Wait until the and buttons are steady on.
The machine is now ready for use.