EasyManua.ls Logo

illy X9 IPERESPRESSO - Page 10

illy X9 IPERESPRESSO
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ENIT
Non bloccare mai le griglie di aerazione poste sulla base
dell’apparecchio.
Installazione dell’apparecchio
Leggere attentamente le istruzioni.
Non installare mai la macchina in un ambiente che può rag-
giungere una temperatura inferiore o uguale a 0°C (se l’acqua
si ghiaccia, l’apparecchio può danneggiarsi) o superiore a 40°C.
Vericare che la tensione della rete elettrica corrisponda a quella
indicata nella targa dati dell’apparecchio. Collegare l’apparecchio
solo ad una presa di corrente avente una portata minima di 6A
per i modelli alimentati a 230Vac e 15A per i modelli a 120Vac
e dotati di uneciente messa a terra.
In caso di incompatibilità tra la presa di corrente e la spina
dell’apparecchio, fare sostituire la spina con unaltra di tipo adat-
to, da centro assistenza autorizzato.
Posizionare l’apparecchio sopra un piano di lavoro lontano da ru-
binetti dell’acqua e lavelli.
Dopo aver tolto l’imballaggio, assicurarsi dell’integrità dell’appa-
recchio prima della sua installazione.
Non lasciare alla portata dei bambini i materiali utilizzati per im-
ballare la macchina.
Pulizia dell’apparecchio
Disinserire la spina dall’impianto elettrico quando si esegue la
pulizia.
Lasciare rareddare l’apparecchio prima della pulizia.
Estrarre il serbatoio dell’acqua tirandolo leggermente verso l’alto
water or powder extinguishers.
Never obstruct the vents on the base of the machine.
Installation of the espresso machine
Read the instructions carefully.
Do not install the machine in an area where the temperature may
reach 0°C/32°F or lower (if water freezes, the appliance may be
damaged) or higher than 40°C/104°F.
Check that the mains electric voltage corresponds to the require-
ments indicated on the machine data plate. Connect the ma-
chine only to a properly grounded power outlet with a minimum
rating of 6A for models powered at 230Vac, and 15A for models
powered at 120Vac.
If the plug and the outlet are not compatible, have the plug re-
placed with a proper one by an authorized service center.
Place the machine on a countertop away from water taps and
sinks.
After removing the packaging, check that the appliance is in per-
fect condition before installation.
Do not leave the packaging materials within childrens reach.
Cleaning the espresso machine
Unplug the machine before cleaning.
Wait until the machine is cool before cleaning.
Remove the water tank by pulling it up slightly and then outward.
Clean the body and attachments with a wet cloth and then wipe

Related product manuals