iLoq S50 - Terms of Service and Warranty; Care and Maintenance Requirements

Avoid damage
• This product is designed and intended for locking doors. Do not use this product for any other
purpose. Using the product for unintended purposes may result in damage, malfunction, or safety
hazards.
• Do not modify the product in any way, except in accordance with the modifications described in this
guide.
• Do not attempt to bypass the locking feature, tamper with the lock or disassemble it. Doing so will
compromise the built-in security and damage the product.
• To avoid damage, handle the product with care and do not force any parts during installation and use.
The knob should turn easily and the cylinder should operate smoothly.
• Do not apply any liquid to the product, including water, grease, solvent, or corrosive substance,
except as specified in this manual.
• Do not expose this product to excessive heat sources, open flames, or heating devices.
• This product contains small magnets. To prevent the batteries of the Programming Key (P55S.1) and
the Key Fob (K55S.1) from draining, please store the product in a separate box away from them.
• After operating the lock, make sure that the knob is rotated back to its normal locked position.
3.3 Terms of Service and Warranty
• The lock cylinder has a 24 month warranty. By purchasing or using the product, you agree to the Terms
of Service found at www.iloq.com.
• If you suspect that this product is broken, do not attempt to repair it. Contact iLOQ customer support
for professional assistance.
3.4 Care & maintenance
The product is designed to be maintenance-free. It does not require any regular maintenance.
6
Document ID - 304931
iLOQ S50 (X50S)