7. Extending the length of the Mortise Cylinder
The iLOQ ¼” extension kit can be used to produce an extended mortise cylinder. Use up to three
extension pieces and screw them to the back of the cylinder.
Parts needed:
• AX50.X.G.02 - 1/4” Extension Kit for Mortise Cylinder:
1. 1/4” Mortise extension
2. Extension plug
3. T20 Screws (x2)
1. Take off the two T6 cam screws and remove the cam.
1
2
3
18
Document ID - 304931
iLOQ S50 (X50S)
To Next Page
Loading...
