3
Unique Design Features
iM3 Dental Systems are designed with unique and practical features to make your work even
more satisfying and productive. Please note; some features listed below, may be optional
depending on the system you purchase.
Control Top
The Corian
®
top is a non-porous work surface which is easy to sanitize. It incorporates a groove
around the edge to prevent burs falling on the floor during procedures. The control box is made
from powder coated aluminum that won’t warp or deteriorate with age.
Color Coded System
All supply lines on iM3 dental systems are color coded to simplify service and
maintenance requirements.
Maintenance Instructions
All maintenance instructions are conveniently printed on the back of the dental machine
ensuring the system is kept in perfect working order. Compressor instructions are printed on the
white compressor tank.
Power Board
A four socket electric power board is conveniently located on the side of the control panel, fea-
turing an IEC female socket.
Adjustable Stainless Steel Stand
The iM3 stand is made from high quality stainless steel and is height adjustable for work and
ease of storage.
Ultrasonic Scaler Coolant Outlet
The ultrasonic scaler coolant outlet is mounted conveniently on the rear of the control box, to
allow the use of the water or system to supply the coolant to your ultrasonic dental scaler.
CLS Enviro System
CLS Enviro System is an ingenious occupational health and patient safety system. CLS is
designed to help reduce the risk of atmospheric pollution and the transfer of viruses, such as
FIV from patient to patient and reduce unpleasant mouth odors.
LED Advantage High Speed Handpiece
The self-generated LED provides daylight-quality, neutrally-coloured white light at 22,000 Lux.
Patented Hygiene system, prevents the suck back of aerosols and micro-particles into the tur-
bine. LED’s offer a robust, long lasting Light source that barely heat up, are shock resistant and
that do not emit any harmful IR and UVA rays.
Particle Filters and Bacterial Filters
Particle filters and bacterial filters are installed on all iM3 dental systems to help reduce particles
entering the water supply and reduce unpleasant environmental odors from the HP exhaust col-
lection bottles.
Suction System
This air driven suction system can be autoclaved (handpiece only) and is an extremely
important tool in the removal of debris from the back of the mouth after scaling.
Oil Free Silent Hurricane Compressor
Mounts underneath the unit on the stainless steel stand—supplying air wherever the unit is to be
used, and is considered more convenient than a noisy compressor which is usually situated in
another room and requires a length of air line. iM3’s has produced an Oil free compressor - low
maintenance, oil free air.
To Next Page
Loading...
Need help?
General
